Jiashan Zhida Machinery & Electrical Appliance Co., Ltd. (ZHIDA) is the first drafting unit of T/ZZB 3865-2024 “Hydraulic motorcycle lift”, a group standard issued by the Zhejiang Quality Association. The standard is currently in force and can be looked up on three independent platforms — links at the bottom of this page.
| Item | Value |
|---|---|
| Standard number | T/ZZB 3865-2024 |
| Chinese title | 液压式摩托车举升机 |
| English title | Hydraulic motorcycle lift |
| Status | In force (现行) |
| Issue date | 5 November 2024 (per China Standard Online Service) |
| Effective date | 5 December 2024 (per China Standard Online Service) |
| Proposing / administering / issuing body | Zhejiang Quality Association (浙江省质量协会) |
| ICS / CCS | 43.180 / R17 |
In the wording of the standard itself, it specifies terms and definitions, product classification, basic requirements, technical requirements, test methods, inspection rules, and marking, packaging, transport, storage and quality commitment. It applies to hydraulic motorcycle lifts with a rated lifting mass of no more than 910 kg; other types of motorcycle lift may use it as a reference.
Standard databases list these normative references for the document: GB/T 191, GB/T 700-2006, GB 2894-2008, GB/T 5226.1, GB/T 6995.2, GB/T 9286-2021, GB/T 13306, GB/T 13384, JB/T 10205-2010 and JT/T 155-2021 — in other words, the usual national rules for steel, safety signs, machine electrical equipment, paint film testing and packaging all sit underneath it.
Drafting units, in the order published:
Named drafters: Wang Rongwei, Yan Guangming, Gu Xiaofeng, Chen Pan, Guan Erwu, Fan Renzhong and Xu Shaoliu.
Being the first drafting unit means the first draft of the document — its structure, its limits and the way its requirements are written — came out of this factory rather than from a standards institute. It is a different kind of credential from holding a certificate: it says the people who make the machines also wrote the rulebook others now test against.
The 910 kg ceiling in the scope is the practical part. Every motorcycle lift in the ZHIDA range sits under it: 1000 lb models are about 454 kg and the 1500 lb models about 680 kg of rated lifting mass, so all of them are inside the band the standard was written for.
| Model | Capacity | Height range | Table |
|---|---|---|---|
| ZD04101-450 | 1000 lb (454 kg) | 180–780 mm | 2060 × 550 mm |
| ZD04104 | 1000 lb (454 kg) | 210–780 mm | 2000 × 600 mm |
| ZD04157-DM-2275 | 1500 lb (680 kg) | 200–1040 mm | 2200 × 750 mm |
If you are deciding between a full-size table and a compact jack, the difference is not capacity but whether the wheels stay on the platform — see motorcycle lift vs motorcycle jack. Every term used here is defined in our workshop equipment glossary.
Yes. It is listed as 现行 (in force) on the China Standard Online Service, is registered on the National Group Standard Information Platform, and was issued by the Zhejiang Quality Association. All three links are in the Where to verify section above.
Terms and definitions, product classification, basic requirements, technical requirements, test methods, inspection rules, and marking, packaging, transport, storage and quality commitment. It applies to hydraulic motorcycle lifts with a rated lifting mass of no more than 910 kg.
Four drafting units, with Jiashan Zhida Machinery & Electrical Appliance Co., Ltd. named first, followed by the Zhejiang Machinery Industry Federation, Shanghai Xianghong Automotive Maintenance & Testing Equipment Co., Ltd. and Changshu Tongrun Automobile Parts Import & Export Co., Ltd.
Yes. The scope covers rated lifting mass up to 910 kg, and ZHIDA motorcycle lifts are rated at 1000 lb (about 454 kg) and 1500 lb (about 680 kg), all below that ceiling.